5 Easy Ways to Clean Car Carburetor
.png)
For those of you motorized vehicle owners, you may already be familiar with the term carburetor. The carburetor is one of the most important components in the car, which greatly affects the fuel system.
Therefore, regular maintenance and cleaning is necessary. Here's how to clean a car carburetor easily that can be applied.
1. Preparing Equipment
The first thing you need to do to clean the carburetor on the car is to prepare various equipment.
The carburetor is in the car's engine, so you'll have to do a little disassembly. The tools needed include keys 10, 12, and 14, pliers, carburetor cleaner, and plus and minus screwdrivers.
2. Open the Air Filter Housing Section
After all the equipment has been prepared, start by opening the air filter housing as well as the filter on the carburetor.
You can use wrenches 10 and 12 to remove the nuts and bolts that are around the filter housing. In doing this step you need to be careful, because otherwise it can cause the bolt to break or slip.
Also read: How to Clean a Car Engine
3. Open the Drain Bolt Section
The next way to clean the car carburetor is to open the online bolt. The drain bolt itself is a bolt that is on the front of the carburetor body, and acts as a cover bolt.
To open this baud easily, you can use a wrench measuring about 14 mm. After removing the drain bolt.
Then spray all the parts at once with the baud drain using a carburetor cleaner . When spraying, make sure that no dirt remains between the carburetor.
4. Set the Air Settings That Go Into the Carburetor
After you have successfully cleaned everything in the carburetor, to continue with the steps on how to clean the car carburetor, you need to reinstall the bolts on the carburetor.
Then adjust the setting of the air that enters the carburetor, so that it is sluggish. Idle or idle is a condition in which the engine is running but not yet operating.
To get this idling position, you can turn the wind rotation about 1.5 turns. Then cover with the palm of the hand several times, so that various dirt remaining on the carburetor can be removed.
That way you can also get the idling position and the wind setting section is also free from dirt and dust attached.
5. Spray Using Carburetor Cleaner
The next tip for cleaning the carburetor is to spray the carburetor using a carburetor cleaner. This treatment will probably make the engine speed down or even die.
If so, you can open the throttle and start the engine again. How to clean a car carburetor you can also end if the carburetor is clean.
After the carburetor is clean, you should adjust the air again to get a stable engine speed. Each component of the car does have its own role, including the carburetor.
Therefore you are obliged to take care of it by means of regular cleaning, from dirt and dust attached to the component parts.
.png)
Posting Komentar untuk "5 Easy Ways to Clean Car Carburetor"